top of page

The following information posted below is as seen on a supplier website. I have not verified the following information and believe it to be true and to the best of my knowledge.




Steel and Hypoallergenic Metals


Hypoallergenic means “below normal” or “slightly” allergenic. The term was coined by the cosmetics industry in the 1950’s, and became a popular marketing term for jewelry soon afterwards.

Many people are allergic to nickel, so “nickel free” and “hypoallergenic” are sometimes considered synonymous. Be aware that hypoallergenic does not mean nickel-free, nor does it have a legal or medical definition for use in jewelry. You’re better off using specific materials rather than the vague term “hypoallergenic.”

Many people believe that stainless steel is nickel free, but most stainless steel alloys (even surgical stainless steel) contain 8-12% nickel. Roughly 6-12% of the population is allergic to nickel, so although it’s legally acceptable to put a “hypoallergenic” label on all stainless steel, it doesn’t seem quite fair to those who are looking for nickel-free jewelry.

Just a few more terms to define, before I get to the list of good metals to try.

Elements and Alloys

Alloys (such as stainless steel, sterling silver and 14kt gold) are mixtures of elements (such as iron, gold, copper and zinc). People create alloys to change the color, melting temperature, and/or strength of lone elements. For example, solid gold is too soft for ear wires — to make it stronger, it is alloyed (mixed) with other elements such as silver and to make 14kt or other alloys of gold. Iron is alloyed (mixed) with other elements primarily to make it stronger and resistant to rust.

Nickel Free or EU Nickel Directive?

Since there isn’t a formal US definition of nickel free, and alloys vary, a good way to find items that are very low nickel, is to search for items that say they meet the EU Nickel Directive. Another method is to avoid alloys entirely, and focus on elemental metals such as niobium and titanium. For more information about the term “nickel free”, see our Nickel-Free Metals Information page.

Good Metals to try:

Because different people are allergic to different metals, I can’t give you a “one size fits all” solution. However, the metals listed below tend to cause fewer problems than others. Carefully check out these metals and links (updated October 2015) to see which metals are likely to work best for you.



Niobium is an excellent choice for people with metal allergies. It is highly resistant to corrosion and other reactions, and is used in medical implants.  Niobium is not plated or painted, so the color will not flake or chip. It is anodized, meaning it is colored by dipping it into an electrically charged “bath.” Because it is an inert element, with no nickel, lead, or other additives, most people with metal allergies can safely wear niobium.  It doesn’t match basic silver and gold colors — but it is available in rich blackcopper, brass, bronzeblue, greenpink, purpleraw, and yellow.

Do not be confused by the color similarities of anodized niobium and anodized aluminum. Both metals can be anodized to wonderful bright colors, but aluminum is too soft for ear wires.

Rings & Things stocks colorful Niobium head pins and jump rings in addition to Niobium ear wires.



Titanium is a very strong metal, frequently used in medical implants, and is another excellent choice for people with nickel allergies.


Our titanium ear wires and earring posts are Grade 1 ASTM F67, which is unalloyed commercially pure titanium, and meets the EU nickel directive. Our titanium earring posts have either a Brittania pewter pad (tin, antimony and copper), or a stainless steel flat pad.

Stainless Steel

There are over 100 alloys of stainless steel, and each is denoted by a unique SAE steel grade number, which may include one or more letters. Stainless steel alloys include steel (iron with carbon), chromium for scratch resistance and corrosion resistance, nickel to reduce brittleness and improve strength at both high and low temperatures, and other trace elements. For stainless steel alloys used in jewelry, these trace elements are approximately 0.75% silicon, 0.045% phosphorous, 0.03% sulfur, 2% manganese, and 0.1% nitrogen.

304 stainless steel is the most popular grade of stainless steel. It is 18-20% chromium, 8-10.5% nickel, 0.08% carbon, plus iron and the trace elements listed above. It is commonly used in the food industry (sinks, coffee urns, dairy storage and hauling, beer/brewing, citrus and fruit juice handling, etc). The same corrosion and stain resistance that make it great for food handling, also make it popular for jewelry.


2-tone stainless steel ear wires allow you to have a plated ball and coil, with a raw stainless steel ear wire. They may look odd in the package, but look great on the ear.


304L stainless steel is almost the same as 304, but has a lower carbon content (0.03%), and may contain a slightly higher amount of nickel (8-12%). This alloy has increased weldability and resistance to corrosion (great for men’s jewelry).


430 stainless steel contains less than 0.75% nickel, and some forms of 430 stainless steel meet the EU nickel directive (less than .05% nickel ion migration). 430 stainless steel has good corrosion resistance compared to non-stainless steel, but not as good as the 304 and 316 alloys.

XC45 and S50C Steel are high-quality structural carbon steel made of 0.42 – 0.5% carbon, 0.3% (or less) nickel, and small amounts of silicon, manganese, sulfur, phosphorous, chromium and copper. This grade provides the springy strength required for French-style barrette backs and French shoe clips.

Surgical Stainless Steel

Adding the word “surgical” to a stainless steel alloy’s name does not actually make it a better grade of steel. The SAE grade number (304, 430, 316L, etc.) defines the alloy and its properties, so the word “surgical” simply tells us “non-SAE-tech people” that 316 and 316L stainless steel alloys have properties suitable for temporary medical implants, or for making durable surgical instruments.


316 and 316L surgical stainless steel contain 2-3% molybdenum for even greater resistance to harsh corrosives (both industrial, and in the body). 316L is a low carbon version of 316, with extra corrosion resistance, and is frequently used for stainless steel watches and marine applications. Like most other stainless steel, it contains 8-10.5% nickel, making it unsuitable for people with nickel allergies.

Sterling Silver and Fine Silver


Sterling silver is an alloy containing at least 92.5% silver. The most popular sterling silver alloy is 92.5% silver and 7.5% copper. To prevent tarnish while on display in department stores and high-end jewelry stores, some sterling is plated with rhodium. Most people can safely wear good quality sterling silver, but a few are allergic to silver or copper. Sterling silver from reputable vendors is nickel free, but be aware that some jewelry marked sterling or 925 — especially if the price seems too good to be true — may contain little or no silver at all, or be alloyed with random metals.


Argentium™ sterling silver replaces some of the copper with 1.2% germanium (the remainder is 6.3% copper and 92.5% silver). Argentium sterling silver is tarnish resistant, laser weldable, and has other unique properties.

Other special alloys of sterling are occasionally available, each with its own unique properties. More info about sterling silver, including hallmarks.


Silver fill (also called silver overlay) is made by using heat and pressure to apply a layer of sterling (.925) silver to a base of less costly metal, usually brass. The minimum layer of silver must equal at least 1/20 of the total weight of the item. Silver fill is 100’s of times thicker than silver plating, so it lasts many years longer before wearing through the layer of silver. If you can wear sterling silver, you can most likely wear silver-fill items for quite a few years before you wear through the top layer to any irritating basemetal layers beneath it.

Vermeil, pronounced “vehr-MAY” [French], is gold plated sterling silver. If you can wear sterling silver, it’s very likely that you can wear vermeil.

Fine silver, sometimes stamped “.999”, is 99.9% pure silver, which means it is softer and more malleable than sterling. It is commonly used for bezels, handmade ball-end head pins, and components made by the Karen Hill tribes.

Just like sterling silver, fine silver can be misrepresented. If you’ve experienced allergies to cheap items marked sterling, 925 or 999, you may want to try again from a reliable, knowledgeable vendor before you rule out silver entirely.


Karat (kt) gold: Pure gold is 24kt, meaning 24 out of 24 parts are gold. 24kt is too soft to be functional, so it is alloyed with other metals for durability, cost and color. 14kt is 14 parts gold out of 24, and the remaining 10 parts are other metals. Depending on the color of gold (which can be yellow, rose, green or white), the other parts may be copper, silver, nickel, zinc, tin, palladium and/or manganese. People with nickel allergies should be aware that, until recently, most white gold contained nickel. Today, palladium is used to make a white gold alloy that is less likely to react to the wearer’s skin.


Gold fill (also called gold overlay) is made by using heat and pressure to apply a layer of karat gold to a base of less costly metal. This produces a surface with karat gold. The minimum layer of karat gold must equal at least 1/20 of the total weight of the item. Gold fill is 50 to 100,000 times thicker than regular gold plating, so it lasts many years longer before wearing through the layer of gold. If you can wear 14kt gold, you can most likely wear gold-fill items for quite a few years before you wear through the top layer to the brass or other basemetal beneath it. Roughly half our gold-fill items are 12kt gold fill; the other half are 14kt gold fill.

Copper and Brass


Copper is a lovely reddish metal. It is easy to work with, but oxidizes quickly, and where it comes into contact with skin, can turn skin green. The “green skin” factor makes it unpopular for ear wires or earring posts. You can lacquer (or otherwise coat) it, but high contact points — such as going through an ear — wear off quickly.

Most people can safely wear copper, but aren’t always excited to have their skin turn color where it touches them. For this reason you may want to mount copper bracelet designs onto a sterling backing, or use copper-colored niobium ear wires on copper earrings.

Alternatively, many people believe that copper can prevent arthritis, so solid copper bracelets are popular. For this effect, it needs to touch (and react with) your skin, so skip any protective layers.


Brass is an alloy of copper and zinc. Depending on the desired properties, the percents of copper and zinc can vary greatly. Because brass is usually 50-90% copper, it has roughly the same “green skin” properties as copper.  Cheap brass earrings may have irritating impurities in their alloy, causing an allergic reaction to people who aren’t allergic to either copper or zinc.



Brass is a popular material for plated ear wires, because it is inexpensive, easy to plate or electrocoat, and is relatively allergy-free.

Non-Metal Earring Findings


Some people are allergic to so many metals that it can be frustrating (or impossible) to find any that are wearable. A good solution is E’arrs Ear Protectors, non-metal sleeves that slide over earring posts (and ear wires).  These add a bit of thickness to the earring post (or ear wire) so they can be annoying for the first few days. After that, they are fine as long as you continue to wear them.

I hope this article help you pick the perfect metals for the jewelry


 Jewelry tarnishing

Tarnished jewelry, two words jewelry lovers cringe at the mere mention of. It’s something we always hear about and automatically think it’s a bad, thing but is it? To answer some of your questions around tarnishing I put together a guide that goes over just exactly what tarnish is,

What is jewelry tarnish, and why does it happen?

Jewelry tarnish is caused when the surface of the metal comes into contact with body oils, makeup, sulfur, sweat, perfumes, deodorants, lotions, and other external substances. Tarnish varies from looking slightly dull to totally black, depending on the metal and how you wear and care for your jewelry. Read on to learn which metals cause what reactions.

Which metals tarnish?

There are many metals that tarnish,

All brass naturally tarnishes over time, which gives it that organic and unique look that we all love. What causes brass to tarnish is the copper within the metal. When copper comes into contact with your skin it’s very common for it to oxidize, and if you’re allergic to brass or have really sensitive skin the oxidation can sometimes turn your skin green. If that’s the case, I recommend wearing sterling silver or gold instead.

Sterling Silver:
Tarnished sterling silver is caused by a number of common and natural chemicals, like sulfur (found in air particles around cities/industrial areas), moisture (if you live in a more humid environment), chlorine (swimming in pools or spas), and your own skin’s acidity level (some people's skin PH is so high silver tarnishes almost instantly!). When it comes down to it, there are so many things in daily life that can cause your silver to tarnish and look dull or completely black. But good news! It’s very easy to manage and remove tarnish from silver.

All gold above 14 karat should not tarnish, and even if it does it is very, very little.

As I said above many metals tarnish and all for different reasons, chemicals in the air,  your body pH or things your jewelry has come in contact with. 

Cleaning is very simple and most retail jewelry cleaners will help restore the shine and if your in a pinch and need something quick toothpaste works! 

bottom of page